Safety Installation Guide For Flush Mount Foyer Lights
The flush mount foyer lights on your entrance will be a very beautiful option for your hall. A simple idea, decorative, and that can transform the whole landscape in just a few hours of work; the flush mount floor lights are a constructive and aesthetic solution that can leverage your work or home. Learn to install them fast and easy with these tips.
The first thing to do is to define the location of the flush mount foyer lights. It measures the distances from the last light to the waterproof housing and acquires the materials to work in comfort. You will need tongs, scissors, wire strippers, connecting rods, wire strippers, hub, and chisels, or shovel or saw, screwdrivers, a bucket and a trowel for mixing cement and sand mortar, rubber tube for an interior, hose with rubber coating, and preventive insulation tape. Depends on whether you are placing them in concrete, cement, earth or wooden pallet. You will need different types of flush mount lights, and insulation gel (for pallets and lawn).
Already defined the places of placement of flush mount foyer lights. Draw the shape with a pencil or whatever is useful. And begins to dig the holes where you place the pieces. Space should be sufficient, without being too large. But loose enough to place the elements without difficulties. Also, create the trenches where the rubber tube will pass. In which the electric cables will go, at the nearest waterproof box.
Once the trenches and holes have been created, place the tube by attaching one end to the waterproof box. And arrange it to copy the shape of the terrain or structure without milestones, but comfortably. It creates the necessary perforations and the appropriate cuts to make the cable travel from one box to another lightbox. The next thing is to cut the electricity, and connect the wires in the box and in the flush mount lights. Then, using the cables, put the cable through the tube and leaving a surplus of about 12 centimeters in each space of the lights. So, that if you need to make repairs, you have plenty of space to work. Prepare the cement mortar and fix the rubber tube in place, covering it with the material, with wood or earth, as the case may be. Let it set and, once dry, begin with the final installation.
Put some mortar (or insulation gel on the days or lawn) and accommodate the outer casing of the flush mount lights. Leaving the firm and ensuring adequate stagnation. Make the electrical connection of the cables in the strips, following the pattern (the blue wire is neutral, the yellow-green is the ground, and the color is the phase), and mounts the light. Fix it tightly, screwing on the outer ring to ensure a sealed and tight space. Finally, once the perimeter has been set and the cement set. It connects the wires to the watertight terminal strip and gives way to general electricity. And the flush mount foyer lights brightly illuminate.